The first advantage of this system is allowing the bending of complex shapes easily and accurately within view, especially Z-bends or narrow parts. Complete quality control is possible with this system without any additional time and with maximum accuracy and reproducibility.

KEBA KeMes A200 device procures to see the angles that it measures, on your controller’s screen while communicating with it’s smart Bluetooth USB dongle. It is located on punch easily by the help of the magnets which are inside of it. Device calculates the current angle while bending under favor of lasers which are spreads on a single source. KeMes A200 is easy to use and it has 2 mods which names are “Machine” and “Manual” can make optionally single measurement, continuous measurement and automatic measurement which is called “Machine” mod. The aim of machine mod is analyzing upper beam movements. It can be charged with USB cable and its adapter and its battery life is about 6 hours.

ErTouch controller instantly shows data that is received from sheet  with the aid of KEBA integration. After bending is over, ErTouch offers chance to enter correction angles by comparing the angle measured by KeMes A200 and the angle programmed by user. This devices measurement range is between 30° and 150° and its measurement precision is ±0.2°. It has 162 mm width, 48.5 mm height, 15.3 mm depth and measurement results is shown on its high-contrast OLED display.