EVO-III
EVO III HYBRID PRESS BRAKE
Next Generation Technology...
The EVO III hybrid press brake is a CNC-controlled 6-axis machine designed specifically for precision bending, characterized by its silent operation and remarkably low energy consumption. This innovative machine achieves a seamless balance between ergonomics, aesthetics, and functionality, offering operators a unique experience while fulfilling our social responsibility through environmentally friendly production practices. Engineered with environmental mindfulness, this equipment delivers not only precision and speed, but also top-tier bending results of the highest quality.
The press brake's high productivity is evident through its rapid Y-axis speed of 200 mm/s, facilitating swift positioning of the bending tool. The working speed of 10 mm/s contributes to precise and controlled bending, further enhancing productivity. Additionally, the return speed of 190 mm/s accelerates the overall process by minimizing non-productive time.
Powered by a servo drive, the motor engages solely when the cylinder is in motion. The EVO III achieves an impressive energy savings of approximately 73% (based on energy consumption data from 500 cycles, comparing the EVO III 110 ton hybrid press brake to a conventional 110 ton hydraulic CNC press brake). Additionally, equipped with a unique closed-loop hydraulic system, our equipment boasts minimal maintenance needs in comparison to traditional hydraulic machines. The specialized hydraulic system demonstrates low energy consumption and environmental friendliness, with an average oil consumption of 34.5 liters. Operating at just 63 dB, it holds the distinction of being the quietest among sheet metal bending machines.
DATA-M LASER PROTRACTOR
Developed by Data M Engineering, it is a powerful solution for measuring bending angles in press brakes.
Read more PlayIRIS PLUS LASER PROTRACTOR
Automatic angle measurement and automatic correction of bending angle
Read more PlayKEBA DIGITAL ANGLE GAUGE
With KEBA angle measuring systems, complex bends can be performed extremely easily and with maximum accuracy.
Read more
4-AXIS BACKGAUGE
Backgauge with 4-axis (X, R, Z1, Z2) servo motor allows you to obtain precise bending of the backgauge with 0.05 mm positioning accuracy according to the desired geometry.
5-AXIS BACKGAUGE
Backgauge with 5-axis (X, R, Z1, Z2, X5) servo motor allows you to obtain precise bending of the backgauge with 0.05 mm positioning accuracy according to the desired geometry. One of the backgauge latches moves within ±100 mm and enables conical bending.
Play
6-AXIS BACKGAUGE ATF TYPE
ATF type backgauge system with 6-axis servo motor is automatically positioned for optimum bending results.
Read more PlayPNEUMATIC REAR SUPPORTS
This is the latch group that is additionally mounted for easy bending in the machine and can also operate pneumatically apart from the backgauge.
LEUZE MLC510 BACK PROTECTION
The back protection light barrier stops the machine in case an object enters the rear of the machine during operation and ensures safety.
MOTORIZED SHUTTER DOOR REAR COVER
A rear safety door that can be used with motors and manually, and has aluminium partitions, which are provided in anthracite grey and metallic grey colours.
Play
BARCODE READER
Facilitates the operator's intensive and complex work processes and prevents errors.
Read more
MOTORISED CROWNING SYSTEM
Thanks to the CNCcontrolled motorized crowning system, the ideal deflection balance can be achieved with the motor.
Read more PlayLASER BEND LINE - B-LIGHT 02
This is a system utilized for bending without the use of backgauge with the help of laser beam, and that allows the bending axis to be clearly visible.
Read moreLASER BENDING LINE - ROLLERI B-LIGHT 01
This is a system utilized for bending without the use of Backgauge with the help of laser beam, and that allows the bending axis to be clearly visible.
Read more
RULER ON TOP BEAM
You can get precise results with Y1+Y2 axis synchronization with a tolerance of 0.01 provided by linear rulers.
ELECTRIC PANEL HEATING AND COOLING SYSTEM
An optional electric panel with heating and cooling system, manufactured in accordance with CE standards is provided.
TOOL STORAGE CABINET
This is a cabinet manufactured by Ermaksan to protect the upper and lower dies used in our machine from external impact, and to keep them clean.
ROLLERI TOOL CABINET
This is a cabinet manufactured by Rolleri to protect the upper and lower dies in our machine from external impact, and to keep them clean.
DELEM DA-66T
The 2D touchscreen display controller is your best assistant in the most difficult bending operations with its functional features.
Read more
DELEM DA-69T
DA-Touch series, 3D graphic display controller is always by your side to ensure the most precise bending operations with its powerful features.
Read more
CYBELEC VISITOUCH 19
Semi-compact control with 19” modern aerodynamic glass surface full touchscreen display and CNC board mounted on the back of the display.
Read more
CYBELEC VISITOUCH 19 MX
Features a 19” modern aerodynamic glass surface full touchscreen display. Has a compact structure with the CNC board mounted on the back of the display.
Read more
STANDARD CONTROLLER ARM
This is the standard equipment in which the CNC controller, which is required for the machine to work, is mounted and allows the controller to move to the front or back of the machine when required.
HEIGHT ADJUSTABLE CNC PENDANT ARM
The height-adjustable CNC pendant arm with shock absorber stands out with its modern design and functional features.
Read more
LED BAR GUIDING SYSTEM
Shows the location of the bent pieces and bending stations with coloured LED bars.
PlayWILA SMART TOOL LOCATOR
This system determines the order of use of the partial dies, which are mounted on the upper beam in full length, and attached to the top tool holder, by means of laser beam.
FRONT SLIDING ARMS
Sliding front support arms with stopper, metric system scales and height adjustment feature allows more precise and easier bending operations.
Play
AP3-AP4 FRONT SUPPORT ARMS SYSTEM
The sheet support system used where the plinth rates of the elastic fine sheets to be bended are bigger.
Read more
SIDE CAGE+SWITCH+AKASII
AKAS finger protection stops the movement of the upper beam when an object is detected.
Read moreSIDE CAGE+SWITCH+AKASII
AKAS finger protection stops the movement of the upper beam when an object is detected.
Read more
SIDE CAGE+SWITCH+DSP AP MCS
DSP MCS AP stops the movement of the upper beam when an object is detected. The beam continues to move if the object is removed.
SIDE CAGE+SWITCH+LASERSAFE IRIS
The system, which is also used as a front finger protection, stops the movement of the upper beam when an object is detected.
Read moreSIDE CAGE+SWITCH+LASERSAFE IRIS PLUS
This is a system that can measure the angle and automatically make angle correction to the CNC.
Read moreSIDE CAGE+SWITCH+LASER SAFE
The system, which is also used as front finger protection, stops the movement of the upper jaw when it detects any object.
Read more
START-STOP
This is the optional system that stops the main motor when there is no upper beam movement in the machine within 2 minutes.
START-STOP + SOFT STARTER
This is the STAR - TRIANGLE motor speed change that we use as an option. Ensures safer and easier speed change for the motor.
CENTRAL LUBRICATING SYSTEM
Automatic lubrication of the parts that require lubrication for extended lifetime of the machine by central lubrication system, without the need for an operator.
Read more
CLOSED LOOP HYDRAULIC SYSTEM
It has a special closed loop hydraulic system. Maintenance requirement is minimal compared to hydraulic machines.
SERVO MOTOR BACKGAUGE
All motors used in the back rest are servo motors. Therefore, the sheet metal can be positioned with minimum precision.
REALISTIC 3D MODELLING (ER TOUCH)
The 3D feature of the controller allows the operator to distinguish the pieces to be processed from each other and provides ease of application.
LOW ENERGY CONSUMPTION (ECO-FRIENDLY)
The special hydraulic system has low energy consumption. It is also environmentally friendly with an average oil consumption of 34.5 litres.
QUIET OPERATION
With a sound level of 63 db, it is the quietest among sheet metal bending machines.
LOW OPERATING COST
Thanks to its low energy consumption, the operating cost is minimal. Thus, it provides advantages to the its users with high efficiency and low operating costs.
Product Catalogue
Please click the link below to get detailed information about our products and to view our product catalogue digitally.
CataloguesOnline Catalog
Similar Products
Check out the other products in the category!
GREEN PRESS FX SERVO
A servo electric press brake that allows you to minimize your costs with energy savings up to 69%.
View product
SPEED-BEND PRO
It is designed to reduce your unit time costs with its fast and precise production capability.
View product
POWER-BEND FALCON
Power-Bend Falcon Series machines redesigned based on users preferences to become a unique machine with its individual electronic and mechanical features.
View product
POWER-BEND PRO
It is designed to maximize your bending performance in different material types.
View product
MICRO BEND
If you do not have much space, the most efficient and smallest hydraulic press brake of its class is by your side.
View product
ECO-BEND EXPERT
Its hardware that does not compromise on quality offers low-investment solutions for your business.
View product
HEAVY DUTY
We offer the most ideal solution for your needs with our high tonnage and customized press brake production experience and R&D power.
View productLET US VISIT YOU
Our competent and expert staff are ready to visit you at your site to determine the most suitable solutions for your business before you make your investment decision!
