BSCRW
EASE OF INSTALLATION
The BSCRW press brake is designed for straightforward installation, reducing setup time and minimizing downtime.
OIL-FREE AND QUIET OPERATION
Fully electric and noise-reducing design ensures an environmentally friendly and comfortable workspace.
EXCEPTIONAL PRECISION
The servo-driven ball screw system guarantees accurate and consistent bends every time.
HIGH SPEED
Achieve up to 300 mm/s operation speed upon request, boosting productivity and efficiency.
LOW MAINTENANCE COSTS
With no hydraulic components and fewer moving parts, maintenance needs and costs are significantly reduced.
REPEATABLE ACCURACY
Consistent results across every cycle ensure uniformity in high-volume production
SUBSCRIBE E-NEWSLETTER
You can subscribe to the e-bulletin to receive information regarding the developments about Ermaksan
Backgauge
Arka Dayama
4-AXIS BACKGAUGE
4 EKSEN ARKA DAYAMA
SINGLE-AXIS BACKGAUGE
TEK EKSEN ARKA DAYAMA
2-AXIS BACKGAUGE
2 EKSEN ARKA DAYAMA
5-AXIS BACKGAUGE
5 EKSEN ARKA DAYAMA
One of the backgauge latches moves within ±100 mm and enables conical bending.
6-AXIS BACKGAUGE ATF TYPE
6 EKSEN ARKA DAYAMA ATF TİPİ
X1, X2, R1, R2, Z1, Z2 - 6 Axis ATF type back gauge system is an option that offers fast and precise work for maximum productivity.
ERTOUCH 21
ERTOUCH 21
Standard Specifications
- 2D Display and 2D Programming
- Windows 10 LTE
- 256 GB Memory
- 2 USB Port
- 2D Display and 2D Programming Offline Software
- Product and Bending Counters
- Hemming and Air Bending
- Quick Help
- FMSC Safety System
- DSP – MCS Safety System
- LazerSafe Safety System
- Remote Access and Diagnostics
- 2 x GigE Ethernet
- 3D Display and 2D Programming Offline Software
- Multi-Touch Panel
- DXF – DWG Tooling Import/Export
- Stationary WorkWindows 10 LTE
- Unlimited Number of Product
- Unlimited Number of Materials
- Unlimited Number of Tooling
- Standard User Defined System
- List – Graphic Mode
- Reporting System
- 21,5” TFT monitor with 1920x1080 resolution
- Up To 12 Axis Control
- 3D Import, Rendering, STEP-IGES Product Import
- 3D Display and 3D Programming Offline Software
- DXF – DWG Product Import / Export
- Automatic Tool Placement
- Tool Segmantation System
- Horn System
- Special Curved Rotating Dies Support
- Network Product Sharing
- User Authorization System
Optional Specifications
- Keba Angle Protractor
- Barcode Reader
- 3rd Party Software Support
- ER 4.0
- Remote Service System
- Mitutoyo Angle Protractor
- Motorized Front Support (AP3 + AP4)
- Led Bar
- Robot Control
DELEM DA-53T
DELEM DA-53T
- "Hot-key” touch navigation
- 1" high resolution colour TFT
- Up to 4 axes (Y1,Y2 + 2 aux. axes)
- Crowning control
- Tool / material / product library
- Servo and frequency inverter control
- Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
- TandemLink (option)
- USB memory stick interfacing
- Profile-T offline software
DELEM DA-58T
DELEM DA-58T
GENERAL SPECIFICATIONS
- Maximum 4 axes
- 2D graphics touch screen programming mode
- 15” high resolution colour TFT screen
- Bending sequence calculation
- Crowning control
- 1 GB memory
- USB flash memory drive
- Alphanumeric product naming
- Real scale product programming and imaging
- Automatic bending sequence calculation
- Programmable material properties
- Millimeters / Inch, kN / Ton selection
- Stroke counter
DELEM DA-66T
DELEM DA-66T
GENERAL SPECIFICATIONS
- 2D graphics touch screen programming mode
- 3D imaging in simulation and production
- 17” high resolution colour TFT screen
- Full-featured Windows application
- Standard Profile-LITE offline software
- 1 GB memory
- Product and tool memory 256 MB
- USB flash memory drive
- Emergency stop button
- Alphanumeric product naming
DELEM DA-69T
DELEM DA-69T
GENERAL SPECIFICATIONS
- 3D and 2D graphics touch screen programming mode
- 3D and 2D imaging in simulation and production
- 17” high resolution colour TFT screen
- Full-featured Windows application
- Profile-T3D offline software
- 1 GB memory
- Product and tool memory 256 MB
- USB flash memory drive
- Emergency stop button
- 2D and 3D automatic bending sequence calculation
- Graphical product and tool selection
- Programmable material properties
- Programmable axis speeds
- Free material programming
- Product and tool search filters
- Millimeters / Inch, kN / Ton selection
- Stroke counter
- Graphic tool configuration
DELEM DA - 69S
DELEM DA - 69S
- 3D and 2D Graphic Touch Screen Programming Mode
- 3D and 2D Imaging in Simulation and Manufacturing
- 24” high-resolution color TFT display
- Fully Equipped Windows App
- Profile-T3D Offline Software
- 4 GB Memory
- Product and Tool Memory
- USB flash Memory Drive
- 2D and 3D Automatic Bending Sequence Calculation
- Programmable Material Specifications
- Programmable Axis Speeds
- Free Material Programming
- Product and Tool Search Filters
- Millimeter / Inch, kN / Ton Selection
- Stock Counter
- Graphic Tool Configuration
- Emergency Stop Button
- Graphical Product and Tool Selection
DELEM DA - 66S
DELEM DA - 66S
- 3D(O) and 2D Graphic Touch Screen Programming Mode
- 2D+ and 2D Imaging in Simulation and Production
- 24” high-resolution color TFT display
- Fully Equipped Windows App
- Profile-LT Offline Software
- 4 GB Memory
- Product and Tool Memory
- USB flash Memory Drive
- 2D and 2D+ Automatic Bending Sequence Calculation
- Programmable Material Specifications
- Programmable Axis Speeds
- Free Material Programming
- Product and Tool Search Filters
- Millimeter / Inch, kN / Ton Selection
- Stock Counter
- Graphic Tool Configuration
- Emergency Stop Button
- Graphical Product and Tool Selection
CYBELEC CYBTOUCH 15
CYBELEC CYBTOUCH 15
CYBELEC VISITOUCH 19
CYBELEC VISITOUCH 19
- 19” modern streamlined glass surface touch screen that can be used with gloves.
- User friendly HMI, similar to the CybTouch’s one, thanks to an intuitive programming and dedicated set-up wizards (auto-tuning).
- 2D graphical profile drawing (Touch Profile) and precise 2D program creation.
- 3D visualization of imported parts.
- Angle measurement with various angle protractors
- Running under Windows 10 for multi-tasking and networking.
- Automatic bending sequence calculation.
- Internal backup and restore functions.
- Outstanding diagnostic tools.
CYBELEC VISITOUCH 19 MX
CYBELEC VISITOUCH 19 MX
- 19” modern streamlined glass surface touch screen that can be used with gloves.
- User friendly HMI, similar to the CybTouch’s one, thanks to an intuitive programming and dedicated set-up wizards (auto-tuning).
- Full 3D visualization and simulation.
- Parts management with DXF flat pattern and 3D format files import.
- Automatic solutions of complex parts, automatic bend sequencing, gauging, tooling and auto segmentation.
- Running under Windows 10 for multi-tasking and networking
- Internal backup and restore functions.
- Outstanding diagnostic tools.
Front Support Arms
Ön Kollar
AP3-AP4 FRONT SUPPORT ARMS SYSTEM
AP3-AP4 ÖN KOL SİSTEMİ
This system prevents deformation of the bent sheet due to the flex-ing of the skirt share. It also provides a comfortable and easy bend-ing by lifting the sheet from the bottom by following the bending path.
STANDARD CONTROLLER ARM
STANDART KONTROLÖR KOLU
L TYPE SLIDING FRONT SUPPORT ARM
L TİPİ ÖN KAYAR KOL
WIDE TYPE FRONT SLIDING ARM
GENİŞ TİP BİLYALI ÖN KAYAR KOL
U TYPE SLIDING FRONT SUPPORT ARM
U TİPİ ÖN KAYAR KOL
Front Protection
Ön Koruma
SIDE CAGE+SWITCH+LEUZE
YAN KAFES+SWITCH+LEUZE (MLC100)
SIDE CAGE+SWITCH+DSP AP MCS
YAN KAFES+SWITCH+DSP AP MCS
SIDE CAGE+SWITCH+AKASII
YAN KAFES+SWITCH+AKASII (MOTORLU)
If the object is moved out of the way, the jaw continues its movement. Once calibrated, it automatically adjusts the height when the upper mould is changed.
SIDE CAGE+SWITCH+AKASII
YAN KAFES+SWITCH+AKASII (MOTORSUZ)
If the object is moved out of the way, the jaw continues to move. Height adjustment is done manually.
Angle Gauge
Açıölçer
IRIS PLUS LASER PROTRACTOR
IRIS PLUS LAZERLİ AÇI ÖLÇER
The IRIS Plus consists of a laser transmitter and receiver set mounted on the top beam of the press brake. The receiver unit includes a high-speed digital camera and image data processing system. This important device successfully performs real-time angle measurement and correction for the most demanding applications.
KEBA DIGITAL ANGLE GAUGE
KEBA DIGITAL AÇIÖLÇER
The first advantage of this system is allowing the bending of complex shapes easily and accurately within view, especially Z-bends or narrow parts. Complete quality control is possible with this system without any additional time and with maximum accuracy and reproducibility.
KEBA KeMes A200 device procures to see the angles that it measures, on your controller’s screen while communicating with it’s smart Bluetooth USB dongle. It is located on punch easily by the help of the magnets which are inside of it. Device calculates the current angle while bending under favor of lasers which are spreads on a single source. KeMes A200 is easy to use and it has 2 mods which names are “Machine” and “Manual” can make optionally single measurement, continuous measurement and automatic measurement which is called “Machine” mod. The aim of machine mod is analyzing upper beam movements. It can be charged with USB cable and its adapter and its battery life is about 6 hours.
ErTouch controller instantly shows data that is received from sheet with the aid of KEBA integration. After bending is over, ErTouch offers chance to enter correction angles by comparing the angle measured by KeMes A200 and the angle programmed by user. This devices measurement range is between 30° and 150° and its measurement precision is ±0.2°. It has 162 mm width, 48.5 mm height, 15.3 mm depth and measurement results is shown on its high-contrast OLED display.
MITUTOYO UNIVERSAL ANGLE GAUGE
MITUTOYO UNIVERSAL AÇI ÖLÇER
- Can easily read measurements through a clear screen.
- Can easily transfer your measurement data to the controller with its Bluetooth feature and provide correction to the value to obtain more accurate results.
- When not active, it will turn itself off after 10 minutes and save up to 200 hours of battery.
Back Protection
Arka Koruma
REARGUARD+SWITCH
ARKA KAPALI KAFES+SWITCH
The windows allow you to check the inside of the machine.
MOTORIZED SHUTTER DOOR REAR COVER
PANJUR TİPİ MOTORLU ARKA KORUMA
SLIDING TYPE REAR GUARD
SÜRGÜLÜ TİP ARKA KORUMA
Foot Pedal
Ayak Pedalı
DOUBLE FOOT PEDAL
ÇİFT AYAK PEDALI
HEIGHT ADJUSTABLE CNC PENDANT ARM
YÜKSEKLİK AYARLI KONTROL KOLU
The controller can be easily moved up and down, left and right, forwards and backwards, providing a comfortable working environment for the operator.
Pendant Arm
Kontrolör Kolu
Crowning System
Bombeleme Sistemi
MOTORISED CROWNING SYSTEM
MOTORLU BOMBELEME
Thus, it ensures that every point of the bent part is at an equal bending angle.
WILA SMART TOOL LOCATOR
WILA SMART TOOL LOCATOR
Bending Automation – Robot & Cobot
Robot Arayüzü
ROBOT INTERFACE
ROBOTLU ABKANT
Ermaksan’s robotic press brake solutions take metal fabrication to the next level by seamlessly integrating advanced robotics with high-precision press brakes. This integrated system automates the entire bending cycle, from precise picking and bending to depositing sheet metal, effectively reducing manual handling and significantly boosting productivity and consistency.
Our robotic systems enable high-speed, repeatable bending processes, enhancing both quality and throughput. Designed for flexibility, Ermaksan’s robotic press brakes cater to a wide range of metal fabrication needs, ensuring precision while minimizing operator intervention. They also improve safety by reducing manual handling on the production floor.
Why Choose Ermaksan’s Robotic Bending Systems?
- Increased Productivity: Achieve faster, more consistent production cycles with automation.
- Enhanced Precision & Quality: Improve bending accuracy and ensure top-quality results with advanced robotic integration.
- Flexible Operations: Adapt to varying workloads and material specifications, easily handling complex bending tasks.
- Safety & Efficiency: Reduce manual intervention and enhance safety, maximizing both operator and workplace efficiency.
Streamline Your Bending Process with Ermaksan
Our robotic press brakes combine precision with automation to optimize your bending operations. By automating the entire bending cycle, Ermaksan’s solutions improve speed, accuracy, and overall performance, driving both productivity and flexibility.
Elevate your metal fabrication processes today with Ermaksan’s robotic press brake solutions—the future of automated metal bending technology.
PRESS BRAKE WITH COBOT
COBOT'LU ABKANT
Discover the next generation of sheet metal bending with Ermaksan’s press brakes, seamlessly integrated with advanced cobot solutions. These cobot-powered systems manage material feeding, positioning, and secure holding, enabling precise and efficient bending processes. This integration enhances productivity, simplifies complex tasks, and optimizes production workflows, saving valuable time and resources.
Designed for modern manufacturing, our cobot-integrated press brakes offer flexible, efficient solutions—even for intricate bending requirements. Featuring an intuitive, user-friendly interface, these cobots are easy to program and require minimal training. Setting up a bending sequence is as simple as placing the cobot in free-drive mode: the operator guides the cobot through each step while the software records the precise movements and speeds.
A unique feature of our cobots is the two control buttons on the 6th axis, where the vacuum holder is located. By pressing these buttons, the operator can move the robot manually, guiding its trajectory without needing a teach pendant or specialized software knowledge. The cobot’s sensors respond to the force applied by the operator, allowing easy, hands-on teaching of the bending path. This approach removes the need for conventional programming, making automation accessible to all users. Manual operation can also be resumed anytime without requiring major adjustments.
The system is CE-compliant and can operate safely alongside the operator without light or safety barriers, as the robot stops immediately upon any impact. Ermaksan’s cobot-integrated press brakes bring flexibility, cost-efficiency, and optimized performance to your manufacturing operations, empowering you to elevate productivity with ease.
Choosing a cobot-integrated bending system allows you to enjoy the benefits of automation without the significant upfront costs and safety requirements associated with traditional robotic cells.
Ruler
Cetvel
RULER ON TOP BEAM
ÜST ÇENE ÜZERİNE CETVEL
BARCODE READER
BARKOD OKUYUCU
In order to facilitate work processes and prevent errors, the programme is loaded automatically by reading the code from the sheet or anywhere else. Thus, your production times are reduced and your productivity increases.
START-STOP
START-STOP
START-STOP + SOFT STARTER
START-STOP + SOFT STARTER
Smart Features
Akıllı Özellikler
LED BAR GUIDING SYSTEM
LED BAR KLAVUZ SİSTEMİ
Automation System
Otomasyon Sistemi
INDUSTRY 4.0
ENDÜSTRİ 4.0
ALL INTEGRATED
Integrate your machine data with your MES and ERP applications.
ALL THE DATA
Record your machine historic performance data. Track your machine Job and Operator performance.
ALL THE MACHINES
Enable all your production line to be monitored. Retrofit you existing machines to our Industry 4.0 platform.
ANY WHERE
Monitor and track machine performance over the flexible easy to use WEB interface from any where
ANY TIME
Reach your machine performance data any time you like.
EFFICIENCY GRAPH OF THE MACHINE FOR THE LAST WEEK
Generates a trend graph by compiling the operational information of the machine. Operation performance for the previous week may be monitored.
DETAILED INFORMATION OF THE LAST WORK COMPLETED
Indicates all the details of the work done, and information such as how long it did take the operator to complete which work and in what way.
OEE VALUES OF THE MACHINE
Collects all the information during the stand-by, production and preparation processes to generate a general productivity chart.
EQUIPMENT DATA
It shows the instantaneous data of the operational elements of the machines as trend graph.
MACHINE MONITORING SCREEN
You may monitor your machines in different fields from a single screen.
STATUS OF THE MACHINES
This provides the lists of the operational and non-operational machines on the field and the summary of their operation.
